Acrylic Emulsion A-200
Acrylic Emulsion A-200
Product Overview
Acrylic emulsion A-200 is a high-performance waterborne acrylic copolymerization emulsion with excellent water resistance, weatherability and mechanical stability, which is suitable for high-end architectural coatings, industrial protective coatings and special adhesives. The product adopts advanced polymerization process to give the coating excellent durability and environmental protection performance, which meets the requirements of domestic and international environmental protection regulations.
Product Characteristics
1. High weathering and aging resistance
- Excellent UV resistance, no yellowing and cracking for long term outdoor use, suitable for harsh climatic environments.
2. Excellent water and alkali resistance
- The coating film is dense, resistant to water immersion, acid and alkali corrosion, suitable for wet or highly alkaline substrates (such as concrete, cement mortar).
3. High adhesion and flexibility
- Strong adhesion to a variety of substrates (metal, wood, plastic, etc.), while having good flexibility to adapt to the thermal expansion and contraction of the substrate.
4. Environmental protection and low VOC
- Does not contain APEO, formaldehyde and heavy metals, in line with GB 18582-2020, EU REACH and other environmental standards.
5. Excellent film-forming property
- Good low-temperature film-forming properties (low MFFT), which can reduce the amount of film-forming additives and reduce VOC emissions.
Technical Parameters
| Item | Parameter Index |
|---------------------|-----------------------|
| Appearance | Micro blue semi-transparent emulsion |
| Solid content (%) | 50±2 | pH | 8.0
| pH value | 8.0-9.5 | | Viscosity (25℃) | Viscosity (25℃) | Viscosity (25℃)
| Viscosity (25°C, mPa-s) | 1000-3000 (Brookfield Viscometer) | Min.
| Minimum Film Formation Temperature (MFFT) | 5 °C |
| Minimum Film Formation Temperature (MFFT) | 5 °C | Glass Transition Temperature (Tg) | Approx. 20 °C | Mechanical Stability
| | Mechanical Stability | | Tested by high speed centrifugation (3000rpm, 30min) |
Fields of application
- Architectural coatings: high-end exterior wall coatings, elastic waterproof coatings, real stone paint overlay, etc.
- Industrial protective coatings: metal anti-corrosion primers/topcoats, automotive refinishing paints, container coatings.
- Adhesives & Sealants: high-performance construction adhesives, textile coatings, pressure-sensitive adhesives, etc.
- Specialty coatings: anti-fouling coatings, floor paints, concrete protective coatings.
Recommendations for use
- Dilution: It is recommended to dilute with deionized water, adding amount ≤5%-10%, specifically adjusted according to the construction viscosity.
- Formulation compatibility: compatible with common pigments, fillers and additives (wetting agent, defoamer), it is recommended to test in advance.
- Storage conditions: 5-40 ℃ cool sealed storage, avoid freezing or exposure to the sun, shelf life of 12 months.
Packing specification
- Standard package: 120kg/plastic drum, 200kg/iron drum.
- Ton drum (IBC) or customized packaging service is available.